| Target
Altitude Range: |
Zero
to 62,700 feet in 100 foot steps (Selectable with
two rotatary switches, one for 1000 foot
increments and one for 100 foot increments) |
| Displayable
Altitude: |
-1200
to 62,700 feet in 100 foot steps. Above 17,800
feet the display changes automatically to Flight
Level Mode using a 29.92” reference. Below
17,800 feet the display shows altitude correctly
for pilot-entered barometric pressure. |
| Audio
Output: |
Audio
tone output for connecting to existing audio
distribution system. Seven pilot-controllable
levels including OFF. Power output: 140 mw maximum
into 500 ohm load. Separate output to drive
external Sonalert. |
| Level
Off Threshold: |
100
to 1000 feet foot steps |
| Cruise
Deviation Alert: |
100
to 200 feet from target altitude |
| Gear
Altitude Alert: |
500
to 1000 feet above destination elevation in 100
foot steps. |
| Input
SIgnals: |
10
encoder lines (in parallel with transponder) |
| Power
Requirements: |
11
to 30 vdc at 100 ma |
| Size: |
2.3"
x 2.3" x 6.5" (behind panel) |
| Approach
Timer: |
One
second to 9 minutes and 59 seconds |
| Clock
Display: |
24-hour
military format (clock is run by internal lithium
battery) |
| Serial
Altitude Output: |
Provides
both RS-232 and RS-422 altitude data for Trimble,
Garmin, Northstar, and Apollo GPS receivers. |
| Weight: |
13
Ounces |
| Fuel
Timer: |
One
minute to 9 hours and 59 minutes |
